This is a PE6 class multi piece model to target GT and Kingfish domestically or internationally. It is ideal for use with diving pencils and small mouthed poppers. The seamless bending curve pleasantly surprise you as it will not feel like a 3 piece blank. Anglers will be able to cast into strong head winds with its added sharpness and the blank will assist anglers to maintain balance during the fight and efficiently lift the fish. We are proud to present you this rod with the potential to go head to head against 30~40kg class GT while being a PE6 class light and sharp rod.
|Length||8ft 1in (Closed Length: 887mm)|
|Section||3 pcs / Grip-Joint + Spigot Ferrule|
|Lure||Diving Stick Bait, Small-Face Cup|
|Specification||SiC Ocean Guide (Fuji)|
|Recommended Anglers Weight||55kg~|
Suitable reel size S・D：14000 / D：5500
Grip length / A: 852mm(Grip full length) B: 505mm(From grip end to reel foot)
Dia of tip / 3.2mm(Just below top guide) Dia of butt / 14.3mm (Butt diameter measured 920mm from the bottom)
Reel seat / DPS20(Fuji) Up Lock
Grip end / BRC
Ripplefisher’s 3 piece pack rod, “GTXpedition” model has been reborn. When considering recent traveling limitations, the collapsed length has been set to 887mm for the two PE6 and PE8 class rods. These models are not only suitable for your GT fishing in exotic locations but also trips targeting massive kingfish. By combining these rods with the Aquila EX models, anglers will have a wider range to choose from depending on the sea conditions, lure size and target size.
By reviewing the bending of the new GTXpedition models, we were able to perfect it as a 3 piece rod. With its lightness, outstanding balance, sharpness and appropriate bending curve, you will not believe it to be a multi piece rod.
We hope you can first handedly experience the ever improving technology at Ripplefisher.
Although the GTX series were developed as a 3 piece model for fishing trips overseas, they are also ideal for not only domestic GT, but also the casting game for Kingfish. The difference from the PE6 class Aquila EX is the sharp stiffness during the casting, whereas the Aquila EX is more suited for technical small maneuvers of the lure. In addition, the stiffness and strength of the regular tapered GTX series have made it easy to perform long jerks of the lure at a consistent pace.
GTXpedition Bending Curve
GTXpedition Comparison Load 6kg
Here are the bending curves of the 3 piece model “GT expedition” with a static load of 6kg. As a comparison, we have also included the bending curve of the Aquila EX83-6 and Ultimo83M. Both the GTX81M and the Aquila EX83-6 are specified as PE 6 line class and have similar rod power, but as you can see in the illustration, the blank of the GTX81M is stiffer.
It is therefore more suitable for use with poppers. If you are more interested in the light GT game using diving pencils, you might want to consider the Aquila EX83-6. The power of the GTX81MH and the Ultimo 83M seem to be similar in the illustration, but the GTX81MH is stiffer and sharper and once the rod is lifted higher, the GTX81MH is more powerful. The characteristics of the GTX series can be summerized as having a sharp casting feel while smoothly bending in once the rod is loaded with the fish.